EN10028-5 P420M steel is a fine grain steel material for pressure vessels. Material number is 1.8824 . P420M steel for pressure equipment has good plasticity, toughness, cold bending performance and welding performance. Email: bebon.steel@outlook.com EN10028-5 P420M fine grain steel technical data S% Al% N% Mo% Nb% Ni% Ti% V% 0.015 0.02 0.02 0.20 0.05 0.5 0.05 0.1 Tensile Strength (MPa) Yield Strength (MPa) % Elongation in 2 in.(50mm) min Impacting Test Temperature (°C) 550 390 19 +20/0/-20 P420M/1.8824 steel plate and sheet size Thickness : 3 - 150 mm Width: 1220-4200mm Length : 3000mm-11000mm. Production : Hot-Rolled (HR) Heat Treatment : Rolled/Normalized/N+T/quenched and tempered EN10028-5 P420M steel plates are usually delivered in a thermomechanically rolled state. Steel plates shall be delivered by shearing or flame cutting.

S550Q steel plate is a hydroelectric steel plate. It is a low-alloy high-strength steel plate and is a German standard steel plate. It has the characteristics of high yield and many strengthening alloy elements. When the S550Q steel plate is required to have thickness performance, you can also add a symbol representing the thickness direction, that is, the Z-direction performance level after the grade specified above, such as S550Q-Z15, S550Q-Z25, S550Q-Z35. S550Q steel plate composition(%) C:<=0.22, Si:<=0.86, Si:<=1.80, P:<=0.030 S:<=0.017, N:<=0.0060, Cu:<=0.55, Mo:<=0.74, Cr:< =1.60, V:<=0.14, Nb:<=0.07, Ti:<=0.07, B:<=0.0060, Ni:<=2.10 What are the mechanical properties of S550Q plates? Tensile strength Rm: 640-820MPa; Yield strength: 550 MPa; The elongation of copy after fracture is 16% S550Q steel plates delivery status S550Q plate is delivered in the quenched and tempered tempered state. It can also be attached to the requi

Chemical composition(%) of P460NL1 pressure vessel plate under the EN10028-3-2003 version Carbon: 0.18 max., Manganese: 1.10-1.70, Phosphorus: 0.025 max., Sulfur: 0.015 max., Silicon: 0.50 max., Chromium: 0.30 max., Molybdenum: 0.80 max., Nickel: 0.50 max., Vanadium: 0.10 max., Copper: 0.30 max., Nitrogen: 0.012 max., Aluminum: 0.020 max., Titanium: 0.03 max., Niobium: 0.05 max., Nb+Ti+V max.: 0.12 EN10028-3-2003 P460NL1 steel is a special alloy steel that can be used as a low-temperature pressure vessel steel plate. Has good plasticity, toughness, cold bending performance and welding performance. P460NL1 pressure vessel plate size Thickness : 3 - 150 mm Width: 1220-4200mm Length : 3000mm-11000mm. P460NL1 steel plate delivery status: normalizing

PRO 500 bulletproof steel (ballistic steel) has good ballistic resistance, cold forming performance and welding performance. PRO 500 armor bulletproof steel plate application: 1.  Bulletproof door, bulletproof helmet, bulletproof vest, bulletproof shield; bank counter, confidential safe; 2.  Anti-riot vehicles, bullet-proof banknote transport vehicles, armored personnel carriers, combat vehicles; 3.  Submarine, landing boat, anti-smuggling boat, helicopter, etc. PRO 500 steel plate manufacturing process 1. Welding performance: The carbon equivalent of PRO 500 steel is between 0.50-0.62, indicating that this steel has good welding performance. The heat input during welding is about 1.5-2.5 KJ/mm. Using domestic welding materials can also obtain high-quality welding workpieces. 2. Cold bending: follow the following points to avoid cracks during cold bending, please call our company for consultation. 3. The relationship between the bending inner radius and the thickness

1Cr6Si2Mo steel is a martensitic heat-resistant steel with good oxidation resistance at 800℃. Compared with 1Cr5Mo steel, the Si content is 1.5% more, which makes the temper brittleness tendency of the 1Cr6Si2Mo steel increase, and the parts will produce brittle fracture when working at high temperature for a long time. The steel has good corrosion resistance in sulfur-containing oxidizing atmosphere and hot petroleum medium. Chemical Composition(%) C≤0.08 Si:1.5-2.0 Mn≤0.37 P≤0.014 S≤0.001 Cr:4.0-6.0 Mo:0.45-0.6 Ni≤0.04 Mechanical properties Yield strength: 401Mpa; Tensile strength: 547Mpa; Elongation: 31.5% After normalizing and tempering heat treatment, 1Cr6Si2Mo heat-resistant steel has higher endurance strength and creep strength. The steel has an air quenching phenomenon. After hot working, if it is cooled too quickly, cracks will occur and it should be cooled slowly. Weldability is poor, electric welding can be used, gas welding is not suitable, preheating to 300

26SiMnMo (GY5) bulletproof steel description 26SiMnMo (GY5) is a high-strength and high-toughness steel plate, which belongs to bulletproof steel. It has good anti-elastic properties, welding performance and mechanical processing performance. 26SiMnMo plate is suitable for combat command vehicles, explosion-proof vehicles, banknote transport vehicles, bulletproof trucks, explosion-proof doors, confidential safes. Relative grades: 26SiMnMo (Gy5), 28CrMo (Gy4), 22SiMn2TiB (616), PRO500, 32CrNi2MoTiA (A-8), 32Mn2Si2MoA (F-3), 32Mn2SiA (F-2) 26SiMnMo bulletproof steel shape size deviation implementation of the national standard: GB/709-2006 26SiMnMo delivery status: The steel plate is shipped in a quenched + tempered state, and the surface is shot blasted before delivery. Chemical Composition: Carbon: 0.23~029 Silicon: 120~160 Manganese 1.20~1.60 Sulfur: <0.030 Phosphorus: <0.030 Mechanical Properties Grade Yield strength Rp0.2Mpa; Tensile strength RmMp

32CrNi2MoTiA protective steel is a kind of high corrosion-resistant super austenitic stainless steel. 32CrNi2MoTiA  steel  has much greater corrosion resistance than 316 ordinary stainless steel. However, compared with 904L (NO8904) stainless steel at high concentration, the corrosion resistance of 254SMO is slightly weaker. Main components: carbon ≤0.02, manganese ≤1.00, nickel 17.5～18.5, silicon ≤0.8 phosphorus ≤0.03, sulfur ≤0.01, chromium: 19.5～20.5, 0.5～1.0, molybdenum 6.0～6.5, nitrogen 0.18～0.22 32CrNi2MoTiA protective steel physical properties Density: 8.24g/cm3, melting point: 1320-1390 ℃, magnetic: no Heat treatment: Insulation between 1150-1200℃ for 1-2 hours, rapid air cooling or water cooling. Mechanical properties: tensile strength: σb≥655Mpa, yield strength σb≥310Mpa: elongation: δ≥35%, hardness: 182-223 (HB) Corrosion resistance and main use environment 32CrNi2MoTiA protective steel is a kind of high corrosion-resistant super austenitic stainless ste

Bulletproof steel plate F601 belongs to the F60X series, which is a CrNiMo thin matrix bulletproof steel with strength class from 1700 MPa to 2200 MPa. It is mainly used in the fields of special vehicle protection, personal protection, construction facilities and fortifications. Delivery status : The delivery condition of the  F601  bulletproof steel plate is quenched + tempered. The delivered steel plate is sheared or thermally cut edges, and raw products can also be provided according to the agreement. If the product contact temperature exceeds 150℃, the performance at the time of delivery cannot be guaranteed. Processing performance : When bending is required, F601 steel b ulletproof steel plate  is recommended to use an arc cutter with a diameter greater than 4 times the plate thickness (d≥4t); F602 steel is not recommended for bending, and d≥8t is required for cold bending. Carbide or HSS cutters can be used for drilling. At room temperature, laser, waterjet, oxygen-acetylen

Hot rolled armor protective steel material: BP300, BP370, BP440, BP500, BP550, BP600 BP500 steel description P: Protection, armor protection steel, 500: Brinell hardness level Hot rolled armor protective steel Relying on its own equipment level and technical strength, Baosteel took the lead in successfully developing the BP series in China High-performance armor protection steel, thickness range is 2-12mm. Steel grades and specification Grades  Brinell hardness HB   Available thick   Available width        Length BP300          300               2-12mm         850-1800 mm     2000-12000mm BP370          370                2-12mm         850-1800  mm     2000-12000mm BP440          440                2-12mm         850-1800  mm     2000-12000mm BP500          500                2-12mm         950-1800  mm     2000-12000mm BP600          600                2-12mm         950-1800 mm      2000-12000mm BP550          550                2-12mm        950-180

S960QL steel has a yield strength of 590Mpa - 960MPa, and is widely used in the manufacture of mine car floor above 100 tons, pumping machinery, excavators, truck cranes, crawler cranes, coal mine hydraulic supports, etc. Application: quenched and tempered high-strength steel for construction machinery The production specification of quenched and tempered steel : S960QL plates thickness 8 ~ 150mm, width 1500 ~ 4000mm, length 3000 ~ 16000mm. Good welding performance: welding test results show that the welding seam and fusion line -40 ℃ V-type impact is greater than 60J. Advantages of  S960QL high strength steel Strict tolerances ensure excellent consistency of steel plate performance High impact toughness ensures good crack resistance Excellent bendability and surface quality Excellent weldability, excellent HAZ strength and toughness S960QL steel has high strength, especially in normalized or normalized and tempered state with high comprehensive mechanical prop

WQ890D, WQ890E steel for construction machinery Tempered high-strength steel grades: WQ890D, WQ890E, WQ960D and WQ960E What does  WQ890D stands for?  WQ890 steel plate is a quenched and tempered high-strength steel plate. Name representation method: W-the first pinyin of Chinese Wu; Q is the yield strength, 890 is the yield strength value in MPa; D is the steel quality grade is D, D The impact of the steel plate is -20. The common steel plate quality grades are D and E, namely WQ890D and WQ890E. Technical data of  WQ890D, WQ890E plates chemical composition(%) of WQ890D and WQ890E steel plates C Si Mn P S Mo Nb B Ni Cr Ti V Ceq ≤ 0.18 ≤ 0.50 ≤ 1.30 ≤ 0.020 ≤ 0.010 ≤ 0.60 ≤ 0.07 ≤ 0.003 ≤ 1.20 ≤ 0.09 ≤ 0.03 ≤ 0.08 ≤ 0.6 Mechanical properties of WQ890D and WQ890E steel plates Grade Thickness mm Rp0.2，Mpa Rm Mpa A% Impact energy AKV Temperature℃ J C 10-50 ≥ 890 ≥ 970 ≥ 12 0 ≥34 D

Tempered high-strength steel WQ890 for construction machinery Grade: WQ890 steel plate WQ890 steel plate technical conditions : This technical condition applies to WQ890 steel plate with thickness ≤50mm. The WQ890 plates are suitable for manufacturing steel structural parts such as coal mine hydraulic supports, heavy vehicles, and construction machinery that require good weldability. chemical composition(%) C Si Mn P S Mo Nb B Ni Cr Ti V Ceq ≤ 0.18 ≤ 0.50 ≤ 1.30 ≤ 0.020 ≤ 0.010 ≤ 0.60 ≤ 0.07 ≤ 0.003 ≤ 1.20 ≤ 0.09 ≤ 0.03 ≤ 0.08 ≤ 0.6 Size, shape, weight and tolerance: The size, shape, weight and allowable deviation of the steel plate shall comply with the provisions of GB/T709. The surface quality of the steel plate shall be in accordance with GB/T3274-88. The packaging, marking and quality certificates of steel plates shall be implemented in accordance with GB/T247. Characteristics of WQ890 steel plate: WQ890

BS600MCJ4  steel is a hot rolling carbon low-alloy high strength steel . BS series high-strength structural steel adopts Baosteel advanced smelting technology, niobium-titanium micro-alloying treatment, and precise controlled rolling and controlled cooling technology. The metallographic microstructure obtained is bainite plus a small amount of ferrite. The manufacturing process and metallographic structure ensure qualified and stable mechanical properties, processing performance and reliable quality. BS600MCJ4  high strength steel available sizes Thickness : 2.5-14mm Width : 850-1600mm Length : 2000-12000 Shapes: plates, sheets, and strips According to customer requirements, the rolling width can also be set. The general width is mainly 1500MM and 1250MM. Price range: depending on market deman d BS600MCJ4  steel technical data BS600MCJ4 steel Chemical Composition : Grade C Si Mn P S Alt B BS600MCJ4 ≤0.12 ≤0.50 ≤2.0 ≤0.015 ≤0.005